AUTOMATIC TRANSAXLE SHIFT MECHANISM
3. Remove the clip of the selector lever base plate,
then remove the interlock cable from the U-
groove.
4. Remove the interlock cable from the selector
lever.
5. Remove the lock unit from the bracket.
6. Verify that the marking on the slider pin is
positioned as shown in the figure.
7. Push the interlock cable.
INTERLOCK
CABLE
LOCK UNIT
BRACKET
MARKING
SLIDER PIN
INTERLOCK CABLE
CLIP
acxuuw00000403
05-18
acxuuw00000404
acxuuw00000405
acxuuw00000406
05-18–3