Brake Pedal Removal/Installation; Brake Switch Installation Note; Brake Switch Connector Installation Note - Mazda CX-7 2007 Workshop Manual

12. Lift up the upper side of the dashboard and move
it 20 mm {0.78 in} towards the vehicle rear.
Caution
• If the dashboard is moved towards the
vehicle rear excessively, the wiring
harness could be damaged. Mark the
position and verify the distance when
moving the dashboard.
13. Move the power brake unit to the vehicle front
where the power brake unit fork does not interfere
with the brake pedal arm.
14. Remove the brake pedal.

Brake Switch Installation Note

1. Inspect the brake pedal. (See 04-11-4 BRAKE PEDAL INSPECTION.)
2. With the brake pedal fully released, insert a new brake switch into the installation hole on the lock unit.
3. Secure the brake switch by turning it
counterclockwise 45°.

Brake Switch Connector Installation Note

1. Inspect the brake pedal. (See 04-11-6 BRAKE PEDAL REMOVAL/INSTALLATION.)
2. With the brake pedal in its original position, install the brake switch to the brake switch connector.
End Of Sie
WM: BRAKE SWITCH
04-11–8
CONVENTIONAL BRAKE SYSTEM
DASHBOARD
BRACKET
MARK
20 mm {0.78 in}
BRAKE SWITCH
LOCK UNIT
acxuuw00001861
45°
acxuuw00001744