Mazda CX-7 2007 Workshop Manual page 743

23 Side bearing inner race
(See 03-14-9 Side Bearing Inner Race Disassembly
Note)
Rear Cover Disassembly Note
1. Install the SSTs to the engine stand.
2. Install the rear differential to the SSTs.
3. Remove the rear cover using an oil seal cutter.
Bearing Cap Disassembly Note
1. Place alignment marks on the bearing cap and
carrier.
Rear Differential Component Disassembly Note
1. Remove the rear differential component using the
SSTs.
2. Mark or otherwise distinguish between the
removed left and right adjusting shims, spacers
and side bearing outer races so that they are not
mixed up at the time of reassembly.
DIFFERENTIAL
24 Oil seal
25 Gear case
49 L027 0A2
49 L027 0A2
49 0107 680A
acxuuw00001406
49 0107 680A
acxuuw00001407
MARK
acxuuw00001408
49 T032 317
49 T032 316
49 L027 004
acxuuw00001409
03-14–7
03-14