Mazda CX-7 2007 Workshop Manual page 1101

2. Lock the steering rack end against rotation with a
suitable wrench and install the other side tie rod
using the SST.
Substitution SST
• 49 H032 351
Width across flats 34mm {1.3 in} (Torque
control enabled wrench)
Boot Assembly Note
1. Apply silicone grease to the rubber lip groove.
2. Assemble the boot.
End Of Sie
WM: POWER STEERING OIL PUMP POWER STEERING OIL PUMP REMOVAL/INSTALLATION
1. Remove the drive belt. (See 01-10-3 DRIVE BELT REMOVAL/INSTALLATION[L3 WITH TC].)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
.
1 Pressure switch connector
2 Pressure pipe
End Of Sie
POWER STEERING
1
4
18.6—25.5
{1.9—2.6, 14—18}
3
4
49 H032 351
SUITABLE WRENCH
29.4—44.1
{3.00—4.49, 21.7—32.5}
R
2
R
18.6—25.5
{1.9—2.6, 14—18}
R
3
Return hose
Power steering oil pump
acxuuw00002262
id061400800700
06-14
N·m {kgf·m, ft·lbf}
acxuuw00001346
06-14–21