9.8—14.7 N·m
{100—149 kgf·cm,
87—130 in·lbf}
7.8—10.8 N·m
{79.6—110.1 kgf·cm,
69.1—95.5 in·lbf}
38—51
{3.9—5.2,
29—37}
7.8—10.8 N·m
{79.6—110.1 kgf·cm,
69.1—95.5 in·lbf}
.
1
Generator duct
2
Wiring harness bracket
3
Terminal B cable
Generator Removal Note
1. Remove the cooler hose bracket nut and set the
cooler hose out of the way before performing the
generator removal/installation.
2. Remove the generator from above the engine
compartment.
Generator Installation Note
1. Tighten bolt A temporarily.
2. Tighten bolt B, C to the specified tightening torque.
3. Tighten bolt A to the specified tightening torque.
End Of Sie
CHARGING SYSTEM [L3 WITH TC]
3
4
2
A
B
38—51 {3.9—5.2, 29—37}
1
5
C
4
Generator connector
5
Generator
(See 01-17-5 Generator Removal Note.)
(See 01-17-5 Generator Installation Note.)
6.9—9.8
{71—99,
62—85}
01-17
N·m {kgf·m, ft·lbf}
acxuuw00002016
COOLER HOSE
N·m {kgf·cm, in·lbf}
acxuuw00002017
01-17–5