Mazda CX-7 2007 Workshop Manual page 1263

12 Seat weight sensor
(See 08-10-12 SEAT WEIGHT SENSOR
CALIBRATION.)
(See 08-10-12 SEAT WEIGHT SENSOR
INSPECTION.)
End Of Sie
AIR BAG SYSTEM SERVICE WARNINGS
Air Bag Module Inspection
• Inspecting an air bag module using a tester
can operate (deploy) the air bag module,
which may cause serious injury. Do not use a
tester to inspect an air bag module. Always
use the on-board diagnostic function to
diagnose the air bag module for malfunctions.
Air Bag Module Handling
• Before removing the air bag module or disconnecting the air bag module connector, always turn the
ignition switch to the LOCK position, disconnect the negative battery cable, and then wait for 1 min or
more to allow the backup power supply of the SAS control module to deplete its stored power.
• Handling a live (undeployed) air bag module
that is pointed toward your body could result
in serious injury if the air bag module were to
accidentally operate (deploy). When carrying
a live (undeployed) air bag module, point the
deployment surface away from your body to
lessen the chance of injury in case it operates
(deploys).
• A live (undeployed) air bag module placed
with its deployment surface to ground is
dangerous. If the air bag module were to
accidentally operate (deploy), it could cause
serious injury. Always place a live
(undeployed) air bag module with its
deployment surface up.
Side Air Bag Module Handling
• Before removing the side air bag module or disconnecting the side air bag module connector, always
turn the ignition switch to the LOCK position, disconnect the negative battery cable, and then wait for 1
min or more to allow the backup power supply of the SAS control module to deplete its stored power.
• When a side air bag module operates (deploys) due to a collision, the interior of the seat back (pad,
frame, trim) may become damaged. If a side air bag does not operate (deploy) normally from a seat
back that has been reused, a serious accident may result. After a side air bag has operated (deployed),
always replace both the side air bag module and the seat back (pad, frame, trim) with new parts. After
servicing, verify that the seat operates normally and that the wiring harness is not caught.
AIR BAG SYSTEM
GOOD
GOOD
id081000800200
NO GOOD
acxuuw00001174
NO GOOD
acxuuw00001175
NO GOOD
acxuuw00001176
08-10–3
08-10