Mazda CX-7 2007 Workshop Manual page 892

ON-BOARD DIAGNOSTIC [AW6A-EL, AW6AX-EL]
AFTER REPAIR PROCEDURE[AW6A-EL, AW6AX-EL]
Caution
• After repairing a malfunction, perform this procedure to verify that the malfunction has been
corrected.
• When this procedure is carried out, be sure to drive the vehicle at lawful speed and pay attention
to the other vehicles.
1. Connect the M-MDS to the vehicle DLC-2.
2. After the vehicle is identified, select the following
items from the initialization screen of the M-MDS.
• When using the IDS (notebook PC)
1. Select "Toolbox" tab.
2. Select "Self Test".
3. Select "Module".
4. Select "TCM".
• When using the PDS (pocket PC)
1. Select "Module Tests".
2. Select "TCM".
3. Select "Self Test".
3. Verify the DTC according to the directions on the
screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Perform the following trouble code inspections to ensure that the DTC has been resolved:
• For P0601, P0603, P0604, P0780, P0817, P0882, P0883, P0942, P0961, P0962, P0963, P0973, P0974,
P0976, P0977, P0978, P0979, P0980, P0981, P0982, P0983, P0984, P0985, P0986, P0997, P0998,
P0999, P1700, P2762, P2763, P2764
i. Start the engine.
ii. Warm up the engine and ATX.
iii. Drive the vehicle in D range and make sure that the gears shift smoothly from 1GR to 6GR.
iv. Go to Step 6.
• For P0706, P0707, P0708
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Depress the brake pedal, and shift the selector lever from P to D for 5 s or more.
iv. Go to Step 6.
• For P0711
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range for 15 min or more.
iv. Go to Step 6
• For P0712, P0713
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range for 150 s or more.
iv. Go to Step 6.
• For P0717, P0722
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle, two separate times, in D range at 20 km/h {12 mph} or more for 150 s or more.
iv. Go to Step 6.
• For P0731, P0732
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 10 km/h {6 mph} or more for 2 s or more.
iv. Go to Step 6.
• For P0733
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
iii. Drive the vehicle in D range, at 20 km/h {12 mph} or more for 2 s or more.
iv. Go to Step 6.
• For P0729, P0734, P0735
i. Start the engine.
ii. Warm up the engine to normal operating temperature.
05-02–4
DLC-2
id050211800400
acxuuw00000480