Mazda CX-7 2007 Workshop Manual page 1298

5. Remove in the order indicated in the table.
1 Bolt
2 Front buckle
6. Install in the reverse order of removal.
End Of Sie
WM: REAR BUCKLE
REAR BUCKLE REMOVAL/INSTALLATION
1. Remove the rear seat cushion. (See 09-13-7 REAR SEAT REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
1 Bolt
2 Rear buckle
3. Install in the reverse order of removal.
End Of Sie
WM: FRONT BUCKLE
BUCKLE SWITCH INSPECTION
1. Inspect for continuity between the buckle switch
terminals using a tester.
• If not as indicated in the table, replace the
front buckle.
Seat belt
A
Fastened
Unfastened
End Of Sie
CHILD-RESTRAINT SEAT ANCHOR REMOVAL/INSTALLATION
WM: CHILD-RESTRANT SEAT ANCHOR
1. Remove the trunk end trim bezel.
2. Remove in the order indicated in the table.
1 Bolt
2 Child-restraint seat anchor
3. Install in the reverse order of removal.
End Of Sie
08-11–6
SEAT BELT
: Continuity
Terminal
B
acxuuw00002102
.
2
38.3—78.4
{3.90—7.99,
28.3—57.8}
A
B
40.0—50.0 N·m
{4.08—5.09 kgf·m,
29.5—36.8 ft·lbf}
1
acxuuw00001029
id081100800700
N·m {kgf·m, ft·lbf}
acxuuw00001030
id081100803000
A
B
acxuuw00002101
id081100800100
18.0—27.0 N·m
{1.84—2.75 kgf·m,
13.3—19.9 ft·lbf}
acxuuw00001025