Trunk Lid Trim Removal/Installation; Trunk Side Trim Removal/Installation; Trunk End Trim Removal/Installation - Mazda RX-8 Manual

Hide thumbs Also See for RX-8:

Table of Contents

TRUNK LID TRIM REMOVAL/INSTALLATION

1. While supporting at point A, pull the handle in the direction of the arrow and remove it.

2. Remove the fasteners, then remove the trunk lid trim.

3. Install in the reverse order of removal.

1. Remove the trunk end trim.(See TRUNK END TRIM REMOVAL/INSTALLATION .)

2. Remove the fasteners, then remove the trunk side trim.

3. Install in the reverse order of removal.

1. Remove the fasteners.