Mazda CX-7 2007 Workshop Manual page 1288

4. Secure the curtain air bag module to the tire, by
wrapping a wire (cross section 1.25 mm
2
in } or more) through the tire and the bolt
installation holes at least 4 times as shown in the
figure.
Warning
• If the air bag module is not properly
installed to the tire, serious injury may
occur when the module is operated
(deployed). Make sure to install the air
bag module securely.
5. Stack the tire with the curtain air bag module on
top of two tires without wheels. Stack a tire
without a wheel on top of the tire with the curtain
air bag module, and then stack another tire with a
wheel on the very top.
6. Secure the tires with wire.
7. Connect the SST (Deployment tool) to the SST
(Adapter harness).
8. Connect the SST (Deployment tool) to the
battery. Connect the power supply red clip to the
positive battery terminal, and the black clip to the
negative battery terminal.
9. Verify that the red lamp on the SST (Deployment
tool) is illuminated.
10. Verify that all persons are standing at least 6 m
{20 ft} away from the vehicle.
08-10–28
AIR BAG SYSTEM
2
{0.002
TIRE
TIRE WITH
CURTAIN AIR BAG
MODULE
49 H066 002
WIRE
CURTAIN AIR BAG
MODULE
TIRE WITH
WHEEL
TIRE
WITHOUT
WHEEL
49 L066 002
acxuuw00001288
acxuuw00001289
acxuuw00001276
acxuuw00001290