Mazda CX-7 2007 Workshop Manual page 721

Dust Seal Assembly Note
1. Apply grease to the new dust seal lip.
2. Install the new dust seal using a press and the
SSTs.
Substitution SST
• 49 G028 203
Outer diameter: 64 mm {2.5 in} or more
Inner diameter: 57.6— 59.0 mm {2.27— 2.32
in}
Inner depth: 38.5 mm {1.52 in} or more
End Of Sie
WM: DRIVE SHAFT
FRONT DRIVE SHAFT PRE-INSPECTION
1. Inspect the dust boot on the drive shaft for cracks,
damage, leaking grease, and looseness in the
boot band.
2. Inspect the drive shaft for bends, cracks, and
wear in the joint or splines.
• Repair or replace the drive shaft or boot/band
as necessary.
End Of Sie
DRIVE SHAFT
49 G028 203
03-13
acxuuw00001358
id031300800200
A6E0313W033
03-13–11