Mazda CX-7 2007 Workshop Manual page 839

POWER BRAKE UNIT REMOVAL/INSTALLATION
1. Remove the battery and battery tray. (See 01-17-2 BATTERY REMOVAL/INSTALLATION[L3 WITH TC].)
2. Remove the battery tray bracket as shown in the
figure.
3. Remove the master cylinder component. (See 04-
11-10 MASTER CYLINDER REMOVAL/
INSTALLATION.)
4. Remove the brake pipe as shown in the figure.
5. Remove the accelerator pedal. (See 01-13-17
ACCELERATOR PEDAL REMOVAL/
INSTALLATION[L3 WITH TC].)
6. Remove in the order indicated in the table.
CONVENTIONAL BRAKE SYSTEM
BATTERY TRAY BRACKET
18—26 N·m
{1.9—2.6 kgf·m,
14—19 ft·lbf}
*
A 12.8—21.6 N·m
{131—220 kgf·cm,
114—191 in·lbf}
*
A
COMMERCIALLY AVAILABLE FLARE NUT WRENCH
(FLARE NUT ACROSS FLAT 10 mm {0.39 in})
id041100801800
04-11
acxuuw00001901
acxuuw00001865
04-11–13