Mazda CX-7 2007 Workshop Manual page 1069

AUTOMATIC TRANSAXLE SHIFT MECHANISM
SELECTOR CABLE ADJUSTMENT
1. Remove the center console.
2. Shift the selector lever to P position.
3. Unlock the lock piece of the selector cable
(selector lever side) in the order shown in the
figure.
4. Verify that the manual shaft is in P position.
5. Lock the lock piece of the selector cable (selector
lever side) in the order shown in the figure.
6. Install the center console.
7. Shift the selector lever from P position to M range,
and make sure that there are no other
components in that area to interfere with the lever.
End Of Sie
SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts.
(1) Battery and battery tray
(2) Air cleaner component (See 01-13-5 INTAKE AIR SYSTEM REMOVAL/INSTALLATION[L3 WITH TC].)
(3) Selector lever knob
(4) Center console
(5) Driver side under panel
(6) Accelerator pedal (See 01-13-17 ACCELERATOR PEDAL REMOVAL/INSTALLATION[L3 WITH TC].)
3. Remove in the order shown in the figure.
id051800800700
2
1
acxuuw00000413
1
2
acxuuw00000414
id051800800800
05-18–7
05-18