01-10-28
MECHANICAL [L3 WITH TC]
3. Install a new washer.
4. Install the variable valve timing actuator.
(1) Fix the camshaft in a vise.
(2) Align the marks on the camshaft and the
variable valve timing actuator.
Caution
• If replacing with a new variable valve
timing actuator, place alignment marks in
the same positions as those prior to the
replacement.
(3) Tighten the variable valve timing actuator
installation bolt.
Tightening torque
69— 75 N·m {7.1— 7.6 kgf·m, 51— 55 ft·lbf}
5. Referring to the valve clearance adjustment procedure, install the variable valve timing actuator and camshaft
on the intake air side as a single unit. (See01-10-4 VALVE CLEARANCE INSPECTION/ADJUSTMENT[L3
WITH TC].)
End Of Sie
2007 Mazda CX-7 Workshop Manual (1871–1U–06B)
MECHANICAL [L3 WITH TC]
R
01–10
acxuuw00000145
01-10-28–1