Turbocharger Removal Note - Mazda CX-7 2007 Workshop Manual

Turbocharger Removal Note

1. Remove the middle pipe (See01-15-2 EXHAUST SYSTEM REMOVAL/INSTALLATION[L3 WITH TC].)
2. Disconnect the rear HO2S connector.
3. Remove the front pipe. (See01-15-2 EXHAUST SYSTEM REMOVAL/INSTALLATION[L3 WITH TC].)
Caution
• When removing the cowl grille, a part or tool may hit the edge of the windshield and could damage
it. Protect the windshield by covering it with a clean rag to prevent damage to the windshield.
4. Remove the cowl grille. (See09-16-11 COWL GRILLE REMOVAL/INSTALLATION.)
5. Remove the windshield wiper motor.
6. Remove the cowl panel.
7. Remove the insulator (Exhaust manifold upper side). (See01-15-2 EXHAUST SYSTEM REMOVAL/
INSTALLATION[L3 WITH TC].)
8. Set the generator out of the way. (See01-17-4 GENERATOR REMOVAL/INSTALLATION[L3 WITH TC].)
9. Remove the insulator (Exhaust manifold lower side). (See01-15-2 EXHAUST SYSTEM REMOVAL/
INSTALLATION[L3 WITH TC].)
10. Disconnect the front HO2S connector.
11. Remove the insulator (WU-TWC top side). (See01-15-2 EXHAUST SYSTEM REMOVAL/INSTALLATION[L3
WITH TC].)
12. Remove the vacuum hose (Brake master back side).
13. Remove the front HO2S. (See01-15-2 EXHAUST SYSTEM REMOVAL/INSTALLATION[L3 WITH TC].)
14. Remove the WU-TWC. (See01-15-2 EXHAUST SYSTEM REMOVAL/INSTALLATION[L3 WITH TC].)
15. Remove the oil pipes.
16. Remove the turbocharger.
01-13–8
INTAKE-AIR SYSTEM [L3 WITH TC]
OIL PIPE
R
R
OIL PIPE
R
OIL PIPE
acxuuw00000207
R
acxuuw00000285