Rear Upper Arm Removal/Installation - Mazda CX-7 2007 Workshop Manual

REAR UPPER ARM REMOVAL/INSTALLATION

1. Raise the trailing link to the unloaded condition
with the jack.
Note
• Jacking up the rear suspension to the no-
occupant position will lighten the force on the
bushing and make it easier to perform the
procedure.
2. Remove the rear upper arm.
75.5—102
{7.70—10.4,
55.7—75.2}
3. Install the rear upper arm.
4. Inspect the rear wheel alignment. (See 02-11-4 REAR WHEEL ALIGNMENT.)
End Of Sie
WM: REAR STABILIZER
02-14–10
REAR SUSPENSION
REAR UPPER ARM
JACK
N·m {kgf·m, ft·lbf}
id021400800800
acxuuw00001978
acxuuw00001683