Mazda CX-7 2007 Workshop Manual page 455

1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Drain the engine coolant. (See 01-12-5 ENGINE COOLANT REPLACEMENT[L3 WITH TC].)
4. Remove the charge air cooler duct, air cleaner and fresh air duct component. (See 01-13-5 INTAKE AIR
SYSTEM REMOVAL/INSTALLATION[L3 WITH TC].)
5. Remove the coolant reserve tank. (See 01-12-7 COOLANT RESERVE TANK REMOVAL/INSTALLATION[L3
WITH TC].)
6. Remove the dipstick pipe. (See 01-11-6 OIL PAN REMOVAL/INSTALLATION[L3 WITH TC].)
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. Refill the engine coolant. (See 01-12-5 ENGINE COOLANT REPLACEMENT[L3 WITH TC].)
10. Inspect for engine coolant leakage. (See 01-12-6 ENGINE COOLANT LEAKAGE INSPECTION[L3 WITH TC].)
4.9—7.9
{50—80,
44—69}
.
1 Fan control module connectors
2 Fan control module No.2
3 Upper radiator hose
4 Wiring harness
5 ATF oil cooler pipe
(See 01-12-14 ATF Oil Cooler Pipe Removal Note.)
COOLING SYSTEM [L3 WITH TC]
1.8—3.3
{18—34, 16—29}
2
5.9—8.3
{61—84, 53—72}
2.7—5.0
{28—50,
25—43}
A
A
4
1.8—3.3
{18—34,
16—29}
7
10
5.9—8.3
{61—84, 53—72}
7.8—10.8 {80—110, 70—95}
6 Cooling fan component
(See 01-12-14 Cooling Fan Component Removal
Note.)
7 Fan control module No.1
8 Cooling fan No.1
9 Cooling fan No.2
10 Cooling fan motor No.1
11 Cooling fan motor No.2
N·m {kgf·cm, in·lbf}
acxuuw00002074
01-12–13
01-12