Mazda CX-7 2007 Workshop Manual page 1042

AUTOMATIC TRANSAXLE [AW6A-EL, AW6AX-EL]
Transaxle Removal Note
1. Support the transaxle on a jack.
2. Remove the transaxle mounting bolts.
3. Remove the transaxle.
Transaxle Installation Note
1. Set the transaxle on a jack and lift it.
2. Install the transaxle mounting bolts.
Tightening torque
A: 37— 52 N·m {3.8— 5.3 kgf·m, 28— 38
ft·lbf}
B: 25.5— 34.5 N·m {2.61— 3.51 kgf·m, 18.9—
25.4 ft·lbf}
No.4 Engine Mount Bracket Installation Note
1. Install the No.4 engine mount bracket to the
transaxle and temporarily tighten nuts
2. Temporarily tighten bolt.
3. Temporarily tighten bolt A and nuts B, C.
4. Tighten bolt A, nuts B and C in the order of
B→A→C.
5. Tighten bolt D.
Tightening torque
Bolt A, Nut B, C: 66.6— 93.1 N·m {6.80—
9.49 kgf·m, 49.2— 68.6 ft·lbf}
Bolt D: 74.5— 104.9 N·m {7.60— 10.69 kgf·m,
55.0— 77.3 ft·lbf}
No.1 Engine Mount Installation Note
1. Install the No.1 engine mount bracket to the
transaxle, then temporarily tighten bolts A and B.
2. Install the No.1 engine mount rubber to the
bracket, then temporarily tighten bolt C.
3. Tighten bolts A and B in the order of A→B.
4. Tighten bolt C.
Tightening torque
Bolt A, B: 93.1— 116.6 N·m
{9.50— 11.88 kgf·m, 68.7— 85.9 ft·lbf}
Bolt C: 85.3— 116.6 N·m
{87.0— 11.88 kgf·m, 62.9— 85.9 ft·lbf}
05-17–34
A
A
A
A
BOLT D
BOLT B
ampjjw00001617
B
A
A
A
A
acxuuw00000633
BOLT A
NUT B
NUT C
acxuuw00000634
BOLT A
BOLT C
acxuuw00000635