Mazda CX-7 2007 Workshop Manual page 1170

9. Install in the reverse order of removal.
6.8—9.8 N·m
{69.4—99.9 kgf·cm,
61.6—88.7 in·lbf}
1 Nut
2 Cooler hose (HI)
(See 07-11-15 REFRIGERANT LINES REMOVAL/
INSTALLATION.)
3 Cooler pipe
(See 07-11-15 REFRIGERANT LINES REMOVAL/
INSTALLATION.)
10. Perform the refrigerant system performance test. (See 07-10-6 REFRIGERANT SYSTEM PERFORMANCE
TEST.)
Condenser Installation Note
1. After replacing the condenser, add compressor oil to the refrigeration cycle.
Supplemental oil amount (approx. quantity)
20 ml {20 cc, 0.7 fl oz}
End Of Sie
CONDENSER INSPECTION
1. Inspect for cracks, damage, and oil leakage.
• If any are found, replace the condenser.
2. Inspect for fins clogged by dust.
• If any are clogged, remove the dust from the fins.
3. Inspect for bent fins.
• If any are bent, use a flathead screwdriver to straighten them.
End Of Sie
WM: RECEIVER/DRIER
07-11–18
BASIC SYSTEM
R
R
4 Condenser
(See 07-11-17 CONDENSER REMOVAL/
INSTALLATION.)
acxuuw00002305
id071100801300