Sensor Clamp Assembly Note
1. Attach the sensor clamp as shown in the figure.
Evaporator Temperature Sensor Assembly Note
1. Assemble the evaporator temperature sensor as
shown in the figure.
Adhesive polyurethane (2) Assembly Note
1. Attach the adhesive polyurethane (2) as shown in
the figure.
2. After assembling the evaporator pipe as shown in
the figure, attach the adhesive polyurethane (2)
so that it adheres around the high-pressure side
of the evaporator pipe.
07-11–6
BASIC SYSTEM
SECURE AT END
OF CLAMP
RIGHT
SENSOR
CLAMP
55—65 mm
{2.2—2.5 in}
CABIN
SIDE
ATTACH ALONG
ATTACHMENT LOCATOR
RIB
ADHESIVE
POLYURETHANE (2)
EVAPORATOR
PIPE
HIGH PRESSURE
SIDE PIPE
SENSOR PART
LOCK SECURELY
WRONG
ALIGN NOTCH
PLATE
WITH COVER
ATTACHMENT
LOCATOR
PLATE
ADHESIVE
POLYURETHANE (2)
acxuuw00000696
11
10
9
8
7
6
5
4
3
2
1
45—55 mm
{1.8—2.1 in}
acxuuw00000695
acxuuw00000697
acxuuw00000698