Mazda CX-7 2007 Workshop Manual page 726

Boot Band (Wheel Side) Disassembly Note
Note
• The boot band does not need to be removed unless it is being replaced.
1. Remove the boot clamp with end clamp pliers as
shown and discard the clamp.
Boot Band (Transaxle Side) Disassembly Note
1. Pry up the locking clips using a screwdriver.
2. Pull back the end of the band.
Outer Ring Disassembly Note
1. Mark the outer ring and the shaft for proper
assembly.
2. Remove the clip.
3. Remove the outer ring.
03-13–16
DRIVE SHAFT
acxuuw00001242
acxuuw00001243
MARK
acxuuw00001244
acxuuw00001245