Mazda CX-7 2007 Workshop Manual page 1068

AUTOMATIC TRANSAXLE SHIFT MECHANISM
SELECTOR LEVER INSPECTION
1. Turn the ignition switch to the ON position. (engine OFF)
2. With the brake pedal depressed, verify that there
is a "click" at each range when shifted.
3. Verify that the selector lever can be shifted.
4. Verify that there is a "click" at each position when
shifted from P position to M range.
5. Verify that the positions of the selector lever and
the indicator are aligned.
• If there is any malfunction, adjust the TR
switch. (See05-17-25 TCM REMOVAL/
INSTALLATION[AW6A-EL, AW6AX-EL].)
6. Verify that the vehicle operates in each selected
range.
End Of Sie
SELECTOR LEVER COMPONENT INSPECTION
1. Disconnect the negative battery cable.
2. Remove the center console.
3. Remove the dashboard completely. (See 09-17-4 DASHBOARD REMOVAL/INSTALLATION.)
4. Disconnect the selector lever component connector.
5. Inspect for continuity at the selector lever
component.
• If there is any malfunction, adjust the selector
cable. (See 05-18-7 SELECTOR CABLE
ADJUSTMENT.)
Selector lever
position/range
A
- M
M range center M
+ M
Other
End Of Sie
05-18–6
: Continuity
Connector terminal
B C D E F
D6U518ZW7002
SELECTOR INDICATOR LIGHT
E C
F D
id051800800500
OPERATION WHEN
BRAKE PEDAL IS
DEPRESSED
OPERATION WHEN
BRAKE PEDAL IS
RELEASED
acxuuw00000411
acxuuw00000412
id051800800600
A
B
acxuuw00002533