Mazda CX-7 2007 Workshop Manual page 429

No.1 Engine Mount Removal Note
1. Remove the No.1 engine mount bracket from the
underside of the vehicle.
2. Remove the No.1 engine mount rubber and the
front crossmember as a single unit. (See02-13-10
FRONT CROSSMEMBER REMOVAL/
INSTALLATION.)
No.3 Engine Mount Rubber, No.4 Engine Mount Bracket Removal Note
1. Secure the engine and transaxle using an engine
jack and attachment.
Engine Mount Installation Note
1. Tighten the No. 3 engine mount stud bolt.
Tightening torque
7.0— 13 N·m {72— 132 kgf·cm, 62— 115
in·lbf}
MECHANICAL [L3 WITH TC]
ATTACHMENT
No.1 ENGINE MOUNT BRACKET
No.1 ENGINE
MOUNT RUBBER
ENGINE, TRANSAXLE
ENGINE JACK
No.3 ENGINE
MOUNT
BRACKET
STUD BOLT
FRONT
01-10
acxuuw00000186
acxuuw00000187
acxuuw00000188
acxuuw00000189
01-10–33