Charcoal Canister; Removal/Installation; Charcoal Canister Inspection - Mazda CX-7 2007 Workshop Manual

CHARCOAL CANISTER REMOVAL/INSTALLATION[L3 WITH TC]
1. Remove the under cover (LR).
2. Remove in the order indicated in the table.
1 Evaporative hose
2 Quick release connector
(See 01-14-19 QUICK RELEASE CONNECTOR
REMOVAL/INSTALLATION[L3 WITH TC])
3

Charcoal canister

4 Charcoal canister bracket
3. Install in the reverse order of removal.
End Of Sie
CHARCOAL CANISTER INSPECTION[L3 WITH TC]
1. Remove the charcoal canister. (See01-16-6 CHARCOAL CANISTER REMOVAL/INSTALLATION[L3 WITH
TC].)
2. Plug ports A and C, then blow air into port B.
Caution
• Do not apply the pressure more than 20
kPa {0.2 kgf/cm
canister. Doing so will damage the
charcoal canister.
3. Verify that there is no air leakage from the case.
• If not as specified, replace the charcoal
canister. (See01-16-6 CHARCOAL
CANISTER REMOVAL/INSTALLATION[L3
WITH TC].)
End Of Sie
WM: EVAP SYSTEM LEAK DETECTION PUMP
01-16–6
EMISSION SYSTEM [L3 WITH TC]
.
2
, 2.9 psi} to the charcoal
9.0—13.0
{92—132, 80—115}
3
9.0—13.0
{92—132, 80—115}
A
B
C
id011639801500
2
1
9.0—13.0
{92—132, 80—115}
4
N·m {kgf·cm,in·lbf}
acxuuw00000216
id011639800500
acxuuw00000179