Mazda CX-7 2007 Workshop Manual page 1088

Steering Shaft Installation Note
Caution
• Do not apply a shock in the axial direction of the shaft.
1. Lock the tilt lever.
2. Tighten nut A.
3. Tighten nut B.
4. Tighten bolt C.
Steering Wheel Installation Note
1. Make sure the wheels in the straight-ahead position, and install the steering wheel.
End Of Sie
WM: STEERING SHAFT STEERING SHAFT INSPECTION
1. Inspect the following.
(1) Column bearing for damage
(2) Steering shaft length
• Replace the steering shaft component as
necessary.
Steering shaft length
211.6 mm {8.3 in}
2. Inspect the tilt and telescope operation.
(1) Verify that the adjusting lever moves smoothly
from unlock position to lock position.
(2) Verify that the steering shaft is fixed firmly
when the adjusting lever is locked.
• Replace the steering shaft component as
necessary.
End Of Sie
WM: STEERING GEAR AND LINKAGE
06-14–8
POWER STEERING
ADJUSTING LEVER
A
B
C
LOCKED
UNLOCKED
acxuuw00000497
id061400800600
E6U612ZW7013
B6U0612W008