Tie-Rod End Ball Joint Removal Note; Steering Gear And Linkage, Front Stabilizer, Front Lower Arm And Front Crossmember Component Removal Note - Mazda CX-7 2007 Workshop Manual

Tie-rod End Ball Joint Removal Note

1. Remove the tie-rod end ball joint locknut.
2. Disconnect the tie-rod end ball joint using the
SST.
Steering Gear And Linkage, Front Stabilizer, Front Lower Arm And Front Crossmember Component
Removal Note
1. Support the crossmember component with a jack.
2. Loosen the bolts of the No.1 engine mount
(engine side).
3. Remove the No.1 engine mount bolt (engine
side).
4. Lower the steering gear and linkage, front
stabilizer, front lower arm and front crossmember
component slightly.
FRONT SUSPENSION
49 T028 3A0
02-13
ampjjw00003208
acxuuw00001339
acxuuw00001689
acxuuw00001690
02-13–11