Mazda CX-7 2007 Workshop Manual page 732

Boot Band (Wheel Side) Disassembly Note
Note
• The boot band does not need to be removed unless it is being replaced.
1. Remove the boot clamp with end clamp pliers as
shown and discard the clamp.
Boot Band (Differential Side) Disassembly Note
1. Pry up the locking clips using a screwdriver.
2. Pull back the end of the band.
Clip Disassembly Note
1. Mark the drive shaft and outer ring for proper
assembly.
Caution
• Mark with paint; do not use a punch.
2. Remove the clip.
Snap Ring Disassembly Note
1. Mark the drive shaft end and inner ring for proper
reassembly.
Caution
• Mark with paint; do not use a punch.
2. Remove the snap ring using snap-ring pliers.
03-13–22
DRIVE SHAFT
acxuuw00001242
acxuuw00001243
MARK
acxuuw00001296
MARK
acxuuw00001297