Mazda CX-7 2007 Workshop Manual page 1040

AUTOMATIC TRANSAXLE [AW6A-EL, AW6AX-EL]
Torque Converter Nuts Removal Note
1. Align the holes by turning the torque converter.
2. Insert a flathead screwdriver through the
converter housing service hole, and lock the drive
plate.
3. Remove the torque converter nuts.
No.4 Engine Mount Bracket Removal Note
1. Install the SST using the following procedure.
Caution
• Refer to the SST instruction manual for
the basic handing procedure.
05-17–32
acxuuw00000622
NUT
acxuuw00000632
MAIN FRAME
REAR SHAFT
SIDE BAR
FRONT SHAFT
FRONT FOOT No.1
(ADAPTER FOR FRONT SHAFT)
FRONT FOOT No.2
(ADAPTER FOR FRONT SHAFT)
acxuuw00000223