Mazda CX-7 2007 Workshop Manual page 1272

SEAT WEIGHT SENSOR CALIBRATION
Caution
• If any of the following work is performed, perform the seat weight sensor calibration using the M-
MDS.
— Replacement with a new seat weight sensor
— Replacement with a new seat weight sensor control module
— Replacement with new passenger-side seat parts
— Disassembly of the passenger-side seat
• If any of the following work is performed, perform the seat weight sensor inspection using the M-
MDS. (See 08-10-12 SEAT WEIGHT SENSOR INSPECTION.)
— Removal of the passenger-side seat
— Loosening and retightening of passenger's seat fixing bolts
— Or, the vehicle is involved in a collision
1. Have two 20 kg {44 lb} weights ready to use.
2. Connect the M-MDS to the DLC-2 connector.
3. After the vehicle is identified, select the following
items from the initialization screen of the M-MDS.
• When using the IDS (notebook PC)
1. Select "Body".
2. Select "Restraints".
• When using the PDS (pocket PC)
1. Select "All Tests and Calibrations".
4. Then, select item from the screen menu in the
following order.
1. Select "Passenger Seat Weight Sensor
ReZero".
5. Perform calibration following the procedures on
the M-MDS screen.
End Of Sie
SEAT WEIGHT SENSOR INSPECTION
Caution
• If any of the following work is performed, perform the seat weight sensor inspection using the M-
MDS.
— Removal of the passenger-side seat
— Loosening and retightening of passenger's seat fixing bolts
— Or, the vehicle is involved in a collision
• If any of the following work is performed, perform the seat weight sensor calibration using the M-
MDS. (See 08-10-12 SEAT WEIGHT SENSOR CALIBRATION.)
— Replacement with a new seat weight sensor
— Replacement with a new seat weight sensor control module
— Replacement with new passenger-side seat parts
— Disassembly of the passenger-side seat
1. Connect the M-MDS to the DLC-2 connector.
2. After the vehicle is identified, select the following
items from the initialization screen of the M-MDS.
• When using the IDS (notebook PC)
1. Select "Body".
2. Select "Restraints".
• When using the PDS (pocket PC)
1. Select "All Tests and Calibrations".
3. Then, select item from the screen menu in the
following order.
1. Select "Passenger Seat Weight Sensor
ReZero".
4. Perform inspection following the procedures on
the M-MDS screen.
End Of Sie
WM: SIDE AIR BAG SENSOR
08-10–12
AIR BAG SYSTEM
DLC-2
DLC-2
id081000801700
acxuuw00000647
id081000801800
acxuuw00000647