Server Configuration (Option 0); Network Mode; Set The Ip Address; Set The Gateway Ip Address - Lantronix WiPort User Manual

Embedded wireless device server
Hide thumbs Also See for WiPort:
Table of Contents

Advertisement

5. Select an option on the menu by entering the number of the option in the Your
choice ? field and pressing Enter.
View the current configuration by pressing Enter from the Change Setup menu.
To enter a value for a parameter, type the value and press Enter. To confirm a
current value, press Enter (without inputted parameters).
6. When finished, save the new configurations (9 Save and exit). The unit reboots.

Server Configuration (Option 0)

The unit's basic server (i.e. network) values display upon selecting Server (option 0
from the Change Setup menu). The following sections describe the configurable
parameters within the Server configuration menu.

Network Mode

Select the network mode for the WiPort. Options available are Wired Only, Wireless
Only, and Bridging. For more information on Bridging, see
page 85.

Set the IP Address

If DHCP is not used to assign IP addresses, enter it manually. The IP address must
be set to a unique value in the network. Enter each octet and press Enter between
each section inputted. The current value is displayed in parentheses.

Set the Gateway IP Address

The gateway address, or router, allows communication to other LAN segments. The
gateway address should be the IP address of the router connected to the same LAN
segment as the unit. The gateway address must be within the local network.
The default is N (No), indicating the gateway address has not been set. To set the
gateway address, type Y. At the prompt, enter the gateway address.
WiPort Embedded Wireless Device Server User Guide
Figure 5-4. Setup Menu Options
Change Setup:
0 Server
1 Channel 1
2 Channel 2
3 E-mail
4 WLAN
5 Expert
6 Security
7 Defaults
8 Exit without save
9 Save and exit
Network Mode <0=Wired Only 1=Wireless Only 2=Bridging<One Host>
>:
IP Address : ( 0) ( 0) ( 0) ( 0) _
Set Gateway IP Address (N) ? Y
Gateway IP addr ( 0) ( 0) ( 0) ( 0)_
6: Configuration via Serial Mode or Telnet Port
Your choice ?
8: Wireless Bridging
on
47

Advertisement

Table of Contents
loading

Table of Contents