Editing An Ike Or Ipsec Policy; Deleting An Ike Or Ipsec Policy - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

10. Select the IPsec Protection Type option.
11. Select the Authentication Algorithm option.
12. Enter or copy a generated encryption key in the Encryption Key field.
13. Select the Encryption Algorithm.
14. Enter or copy a generated authentication key in the Authentication Key field.
15. Optional: Enter a local and peer tunnel IP address.
16. Click OK.

Editing an IKE or IPsec policy

An existing IKE or IPsec policy can be edited.
To edit an IKE or IPsec policy, perform the following steps.
1. Open the Switch Administration window.
2. Click Show Advanced Mode.
3. Select the Security Policies tab.
4. Under Security Policies, select Ethernet IPsec or Ethernet IPsec.
5. Select the policy you want to edit.
6. Select Edit.
7.
8. Click OK.

Deleting an IKE or IPsec policy

You can delete one or more IKE or IPsec policies.
To delete an IKE or IPsec policy, perform the following steps.
1. Open the Switch Administration window.
2. Select Show Advanced Mode.
3. Select the Security Policies tab.
4. Under Security Policies, select Ethernet IPsec or Ethernet IPsec.
5. Select the policy or policies you want to delete.
6. Select Delete.
Web Tools Administrator's Guide
53-1002756-01
The choices are ah (for authentication header) and esp (for encapsulated security protocol).
An Edit Policy dialog box displays.
Edit the policy as needed.
The policy is deleted from the SA database (SADB), and is removed from the list.
IPsec over management ports
15
199