Ucst-1024; Ucst-1025; Ucst-1026; Ucst-1027 - Brocade Communications Systems SN3000B Reference

139

UCST-1024

UCST-1024
Message
<Sequence Number> AUDIT, <timestamp>, [UCST-1024], INFO, CFG,
<event-initiator-details>, <event-location>, , Dynamic Load Sharing option has
been disabled.
Probable Cause Indicates the DLS option has been disabled for the switch.
Recommended No action is required.
Action
Severity INFO

UCST-1025

Message
<Sequence Number> AUDIT, <timestamp>, [UCST-1025], INFO, CFG,
<event-initiator-details>, <event-location>, , In-order delivery option has been
enabled with Lossless-DLS option.
Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery
of frames during topology changes.
Recommended No action is required.
Action
Severity INFO

UCST-1026

Message
<Sequence Number> AUDIT, <timestamp>, [UCST-1026], INFO, CFG,
<event-initiator-details>, <event-location>, , LossLess-DLS option has been
enabled.
Probable Cause Indicates that the NoFrameDrop option is enabled. This will help minimizing frame loss during
topology changes.
Recommended No action is required.
Action
Severity INFO

UCST-1027

Message
<Sequence Number> AUDIT, <timestamp>, [UCST-1027], INFO, CFG,
<event-initiator-details>, <event-location>, , LossLess-DLS option has been
disabled.
Probable Cause Indicates that the NoFrameDrop option is disabled. This may cause higher frame loss during
topology changes.
870 Fabric OS Message Reference
53-1002448-01