Ficn-2065; Ficn-2066; Ficn-2082; Ficn-2083 - Brocade Communications Systems SN3000B Reference

FICN-2065

Message
<timestamp>, [FICN-2065], <sequence-number>,, INFO, <system-name>, Egress
Abort:Oxid=0x<the OXID of the aborted exchange>:Unknown Path on
VEPort=<VEPortNumber> from SID=0x<Source Domain><Source Port> to
DID=0x<Destination Domain><Destination Port>.
Probable Cause Indicates an abort operation has been received from a peer FC interface for an exchange.
Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer
Action support for assistance.
Severity INFO

FICN-2066

Message
<timestamp>, [FICN-2066], <sequence-number>,, WARNING, <system-name>,
MemAllocFailed for VEport=<VEPortNumber> could not create required structure.
Probable Cause Indicates an internal resource limit has been encountered such that additional control block
memory could not be allocated.
Recommended This is an unexpected event, either the maximum number of emulation devices are already in use
Action or there is an internal memory leak, contact your vendor's customer support for assistance.
Severity WARNING

FICN-2082

Message
<timestamp>, [FICN-2082], <sequence-number>,, WARNING, <system-name>,
EmulEls:CSWR_RSCN received on VEPort=<VEPortNumber> Domain=0x<Host/Device Side
Domain> Port=0x<Host/Device Side Port>.
Probable Cause Indicates an attached port which had a FICON emulated path established has logged out from the
switch.
Recommended This may be an unexpected event, contact your vendor's customer support for assistance.
Action
Severity WARNING

FICN-2083

Message
<timestamp>, [FICN-2083], <sequence-number>,, WARNING, <system-name>,
EmulEls:SW_RSCN received on VEPort=<VEPortNumber> Domain=0x<Host/Device Side
Domain> Port=0x<Host/Device Side Port>.
Probable Cause Indicates an attached port with the established FICON emulated path has logged out from the
switch.
Fabric OS Message Reference
53-1002448-01
38
FICN-2065
319