BLS System Messages
BLS-1000
Message
<timestamp>, [BLS-1000], <sequence-number>, FFDC, ERROR, <system-name>, <command
name> of GE <port number> failed. Please retry the command. Data: inst=<ASIC
instance> st=<ASIC initializing state> rsn=<reason code> fn=<message function>
oid=<ASIC ID>.
Probable Cause
Indicates that the hardware is not responding to a command request, possibly because it is busy.
Recommended
Retry the command.
Action
Severity
ERROR
BLS-1001
Message
<timestamp>, [BLS-1001], <sequence-number>, FFDC, CRITICAL, <system-name>, FIPS
<FIPS Test Name> failed; algo=<algorithm code> type=<algorithm type> slot=<Slot
Number>.
Probable Cause
Indicates that a FIPS failure has occurred and requires faulting the blade or switch.
Recommended
Retry the command.
Action
Severity
CRITICAL
BLS-1002
Message
<timestamp>, [BLS-1002], <sequence-number>, INFO, <system-name>, An IPsec/IKE
policy was added.
Probable Cause
Indicates that an IPsec or IKE policy was added and the configuration file was updated.
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
53-1002448-01
Chapter
9
89