Fw-1115; Fw-1116; Fw-1117 - Brocade Communications Systems SN3000B Reference

FW-1115

Message
<timestamp>, [FW-1115], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of times E_Ports have gone down has risen above the high boundary.
E_Ports go down each time you remove a cable or small form-factor pluggable (SFP). SFP failures
also cause E_Ports to go down. E_Port downs might be caused by transient errors.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation. Check both ends of the physical connection and verify that the SFP functions
properly.
Severity INFO

FW-1116

Message
<timestamp>, [FW-1116], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of times E_Ports have gone down has changed from a value outside of
the acceptable range to a value within the acceptable range. E_Ports go down each time you
remove a cable or small form-factor pluggable (SFP). SFP failures also cause E_Ports to go down.
E_Port downs might be caused by transient errors.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1117

Message
<timestamp>, [FW-1117], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has changed. The following occurrences can
cause a fabric reconfiguration:
•
•
•
•
Recommended Verify that the cable is properly connected at both ends. Verify that the small form-factor pluggables
Action (SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and
might not require troubleshooting.
Severity INFO
Fabric OS Message Reference
53-1002448-01
Two switches with the same domain ID have connected to one another.
Two fabrics have joined.
An E_Port has gone offline.
A principal link has segmented from the fabric.
45
FW-1115
351