Pdm-1004; Pdm-1005; Pdm-1006; Pdm-1007 - Brocade Communications Systems SN3000B Reference

79

PDM-1004

PDM-1004
Message
<timestamp>, [PDM-1004], <sequence-number>,, WARNING, <system-name>, PDM memory
shortage.
Probable Cause Indicates the parity data manager (PDM) process ran out of memory.
Recommended Reboot or power cycle the switch.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING

PDM-1005

Message
<timestamp>, [PDM-1005], <sequence-number>,, WARNING, <system-name>, FSS register
failed.
Probable Cause Indicates the parity data manager (PDM) failed to register with the Fabos Synchronization Service
(FSS).
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING

PDM-1006

Message
<timestamp>, [PDM-1006], <sequence-number>,, WARNING, <system-name>, Too many
files in sync.conf.
Probable Cause Indicates the configuration file sync.conf contains too many entries.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING

PDM-1007

Message
<timestamp>, [PDM-1007], <sequence-number>,, WARNING, <system-name>, File not
created: <file name> errno= <errno>.
Probable Cause Indicates the parity data manager (PDM) process failed to create the specified file.
534 Fabric OS Message Reference
53-1002448-01