Fw-1448; Fw-1500; Fw-1501; Fw-1502 - Brocade Communications Systems SN3000B Reference

45

FW-1448

FW-1448
Message
<timestamp>, [FW-1448], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Error ports: <Number of Error ports> Error out of
<Total number of ports> ports:config(<Percentage configured> percent,<actual
threshold limit>). (Port(s) <port list>).
Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of faulty ports
are greater than or equal to the policy set by the switchStatusPolicySet command. A port is faulted
because of port segmentation or port disable.
Recommended Execute the switchShow command to know the reason for port segmentation and port disable.
Action Take necessary action to bring the port up.
Severity WARNING

FW-1500

Message
<timestamp>, [FW-1500], <sequence-number>,, WARNING, <system-name>, Mail overflow
- Alerts being discarded.
Probable Cause Indicates that mail alert overflow condition has occurred.
Recommended Resolve or disable the mail alert using the fwMailCfg command.
Action
Severity WARNING

FW-1501

Message
<timestamp>, [FW-1501], <sequence-number>,, INFO, <system-name>, Mail overflow
cleared - <Mails discarded> alerts discarded.
Probable Cause Indicates that the mail overflow condition has cleared.
Recommended No action is required.
Action
Severity INFO

FW-1502

Message
<timestamp>, [FW-1502], <sequence-number>,, WARNING, <system-name>, Invalid Email
address <Invalid address> is configured from pre-Matador config file.
Probable Cause Indicates that the configuration file has invalid e-mail addresses.
406 Fabric OS Message Reference
53-1002448-01