Auth-1001; Auth-1002; Auth-1003; Auth System Messages - Brocade Communications Systems SN3000B Reference

AUTH System Messages

AUTH-1001

Message
<timestamp>, [AUTH-1001], <sequence-number>,, INFO, <system-name>, <Operation
type> has been successfully completed.
Probable Cause Indicates that the secret database operation has been updated using the secAuthSecret
command. The values for Operation type can be "set" or "remove".
Recommended No action is required.
Action
Severity INFO

AUTH-1002

Message
<timestamp>, [AUTH-1002], <sequence-number>,, ERROR, <system-name>,
type>
Probable Cause Indicates that the specified action has failed to update the secret database using the
secAuthSecret command. The values for Operation type can be "set" or "remove".
Recommended Retry the secAuthSecret command.
Action
Run the supportFtp command (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR

AUTH-1003

Message
<timestamp>, [AUTH-1003], <sequence-number>,, INFO, <system-name>, <data type>
type has been successfully set to <setting value>.
Probable Cause Indicates that an authentication configuration value was set to the specified value. The data type is
either authentication type, DH group type, or policy type.
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1002448-01
has failed.
Chapter
5
<Operation
55