Sec-3032; Sec-3033; Sec-3034 - Brocade Communications Systems SN3000B Reference

Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not
Action planned, take appropriate action as defined by your enterprise security policy.
Severity INFO

SEC-3032

Message
<Sequence Number> AUDIT, <timestamp>, [SEC-3032], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: <Event Name>, Status:
success, Info: Switch is configured to <accept or reject> <Database name>
database.
Probable Cause Indicates the specified event has occurred to accept or reject a certain database.
Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not
Action planned, take appropriate action as defined by your enterprise security policy.
Severity INFO

SEC-3033

Message
<Sequence Number> AUDIT, <timestamp>, [SEC-3033], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: fddcfg --fabwideset,
Status: success, Info: Fabric wide configuration set to <Fabric-wide configuration
set by user>.
Probable Cause Indicates the specified event has occurred.
Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not
Action planned, take appropriate action as defined by your enterprise security policy.
Severity INFO

SEC-3034

Message
<Sequence Number> AUDIT, <timestamp>, [SEC-3034], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: aaaconfig, Status: success,
Info: Authentication configuration changed from <Previous Mode> to <Current Mode>
<Exisisting sessions are terminated or not>.
Probable Cause Indicates an authentication configuration has changed.
Recommended Verify the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
Fabric OS Message Reference
53-1002448-01
134
SEC-3032
833