Fw-1181; Fw-1182; Fw-1183 - Brocade Communications Systems SN3000B Reference

Message reference
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

FW-1181

Message
<timestamp>, [FW-1181], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRC) that the port experiences has
fallen below the low boundary. A low number of invalid CRCs means that the switch is functioning
normally.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO

FW-1182

Message
<timestamp>, [FW-1182], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRC) that the port experiences has
risen above the high boundary.
Recommended
This error generally indicates an deteriorating fabric hardware. Check your small form-factor
Action
pluggables (SFPs), cables, and connections for faulty hardware. Verify that all optical hardware is
clean.
Severity
WARNING

FW-1183

Message
<timestamp>, [FW-1183], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRC) that the port experiences has
changed from a value outside of the acceptable range to a value within the acceptable range.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check
your small form-factor pluggables (SFP), cables, and connections for faulty hardware. Verify that all
optical hardware is clean.
Severity
INFO
Fabric OS Message Reference
53-1002448-01
45
FW-1181
367

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade 8/12cBrocade 8/24cFabric os v7.0.1

Table of Contents