Sec-1040; Sec-1041; Sec-1042; Sec-1043 - Brocade Communications Systems SN3000B Reference

SEC-1040

Message
<timestamp>, [SEC-1040], <sequence-number>,, ERROR, <system-name>, Invalid
portlist (<port list>). Cannot combine * with port member in the same portlist.
Probable Cause Indicates the port list contains the wildcard asterisk (*) character. You cannot use the asterisk in a
port list.
Recommended Enter the port list values without any wildcards.
Action
Severity ERROR

SEC-1041

Message
<timestamp>, [SEC-1041], <sequence-number>,, ERROR, <system-name>, Invalid port
member <port member> in portlist (<port list>). <Reason>.
Probable Cause Indicates the port member is invalid for one of the following reasons:
•
•
•
Recommended Use valid syntax when entering the port members.
Action
Severity ERROR

SEC-1042

Message
<timestamp>, [SEC-1042], <sequence-number>,, ERROR, <system-name>, Invalid
index/area member <port member> in portlist (<Port list>). Out of range (<Minimum
value> - <Maximum value>).
Probable Cause Indicates the specified index or area member is not within the minimum and maximum range.
Recommended Use valid syntax when entering index or area numbers.
Action
Severity ERROR

SEC-1043

Message
<timestamp>, [SEC-1043], <sequence-number>,, ERROR, <system-name>, Invalid port
range <Minimum> - <Maximum>.
Probable Cause Indicates the specified port is not within the minimum and maximum range.
Fabric OS Message Reference
53-1002448-01
The value is not a number.
The value is too long. Valid numbers must be between one and three characters long.
The value cannot be parsed due to invalid characters.
94
SEC-1040
587