Ps-1003; Ps-1004; Ps-1005; Ps-1006 - Brocade Communications Systems SN3000B Reference

84

PS-1003

PS-1003
Message
<timestamp>, [PS-1003], <sequence-number>,, WARNING, <system-name>, Failed to set
end-to-end monitoring mask on ISL ports.
Probable Cause Indicates that the restoring configuration has failed to set the end-to-end monitoring mask on at
least one ISL port.
Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
Action enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING

PS-1004

Message
<timestamp>, [PS-1004], <sequence-number>,, WARNING, <system-name>, Failed to add
end-to-end monitors on port
Probable Cause Indicates that the restoring configuration has attempted to add end-to-end monitors on at least one
ISL port.
Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
Action enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING

PS-1005

Message
<timestamp>, [PS-1005], <sequence-number>,, WARNING, <system-name>, ISL monitor
on port
Probable Cause Indicates that ISL and end-to-end monitors have used up all hardware resources.
Recommended To resume counting, delete some end-to-end monitors sharing the same hardware resource pool.
Action
Severity WARNING

PS-1006

Message
<timestamp>, [PS-1006], <sequence-number>,, WARNING, <system-name>, Failed to add
fabricmode toptalker monitors on domain=<domain id>, because end-to-end monitors
are configured on this switch.
Probable Cause Indicates the end-to-end monitors are configured on the switch.
Recommended Delete the end-to-end monitors on that switch and re-install the fabricmode TopTalker monitor.
Action End-to-end monitors and fabricmode Top Talker monitors are mutually exclusive.
Severity WARNING
554
<port>
<port>
stopped counting because no hardware resources are available
which is an ISL port.
Fabric OS Message Reference
53-1002448-01