Fw-1001; Fw-1002; Fw-1003; Fw System Messages - Brocade Communications Systems SN3000B Reference

FW System Messages

FW-1001

Message
<timestamp>, [FW-1001], <sequence-number>,, INFO, <system-name>, <label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the internal temperature of the switch has changed.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation. To prevent recurring messages, disable the changed alarm for this threshold.
If you receive a temperature-related message, check for an accompanying fan-related message
and check fan performance. If all fans are functioning normally, check the climate control in your
lab.
Severity INFO

FW-1002

Message
<timestamp>, [FW-1002], <sequence-number>,, WARNING, <system-name>, <Label>, is
below low boundary (High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the internal temperature of the switch has fallen below the low boundary.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation. Typically, low temperatures means that the fans and airflow of a switch are
functioning normally.
Verify that the location temperature is within the operational range of the switch. Refer to the
hardware reference manual for the environmental temperature range of your switch.
Severity WARNING

FW-1003

Message
<timestamp>, [FW-1003], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the internal temperature of the switch has risen above the high boundary to a value
that might damage the switch.
Fabric OS Message Reference
53-1002448-01
Chapter
45
341