Ficn-1069; Ficn-1070; Ficn-1071 - Brocade Communications Systems SN3000B Reference

38

FICN-1069

Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer
Action support for assistance.
Severity ERROR
FICN-1069
Message
<timestamp>, [FICN-1069], <sequence-number>,, ERROR, <system-name>, Emulation
Configuration Error on TunnelId <Tunnel ID>.
Probable Cause Indicates an error has been noted in the FICON configuration. Refer to the string for the nature of
the configuration issue.
Recommended If resolution of the configuration issue cannot be completed, contact your vendor's customer
Action support for assistance.
Severity ERROR

FICN-1070

Message
<timestamp>, [FICN-1070], <sequence-number>,, INFO, <system-name>,
DevTapeIngr:Exceptional Status rcvd on Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation
state> status=0x<the exceptional status value>.
Probable Cause Indicates the normal end of tape status (0x0D or 0x05) is received from the device or error status
(including Unit Check 0x02) is received from an active emulation device.
Recommended The end of tape is a normal event during pipelining and not the unit check. If there are associated
Action IO error messages with this event, contact your vendor's customer support for assistance.
Severity INFO

FICN-1071

Message
<timestamp>, [FICN-1071], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Tape Loaded on Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>.
Probable Cause Indicates the tape IOs are processed from a locally connected LPAR, which indicates that a tape is
loaded on a device.
Recommended No action is required.
Action
Severity INFO
300 Fabric OS Message Reference
53-1002448-01