Sulb-1008; Sulb-1009 - Brocade Communications Systems SN3000B Reference

Message reference
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

SULB-1008

Message
<timestamp>, [SULB-1008], <sequence-number>,, INFO, <system-name>, Standby CP
booted successfully with new firmware.
Probable Cause
Indicates the standby CP has rebooted successfully.
Recommended
No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity
INFO

SULB-1009

Message
<timestamp>, [SULB-1009], sequence-number>,, INFO, <system-name>,
Firmwaredownload command failed. status: 0x<status code>, error: 0x<error code>.
Probable Cause
Indicates the firmwareDownload command failed. The additional status code and error code
provide debugging information.
Table 7
in this RASLOG message.
TABLE 7
Status message
"firmwareDownload sanity check failed."
"Sanity check failed because system is non-redundant."
"Sanity check failed because firmwareDownload is already in progress."
"Sanity check failed because FABRIC OS is disabled on Active CP."
"Sanity check failed because HAMD is disabled on Active CP."
"Sanity check failed because firmwareDownload is already in progress."
"Sanity check failed because FABRIC OS is disabled on Standby CP."
"Sanity check failed because HAMD is disabled on Standby CP."
"firmwareDownload failed on Standby CP."
"firmwareDownload failed on Standby CP."
"firmwareDownload failed on Standby CP."
"firmwareCommit failed on Standby CP."
"firmwareDownload failed."
"firmwareDownload failed due to IPC error."
"Unable to check the firmware version on Standby CP due to IPC error."
"firmwareDownload failed due to IPC error."
"firmwareDownload failed due to IPC error."
"Standby CP failed to reboot due to IPC error."
"firmwareCommit operation failed due to IPC error."
Fabric OS Message Reference
53-1002448-01
lists firmwareDownload status messages and status codes. Some of them will not show up
Status messages and status codes
101
SULB-1008
Status code
0x30
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x40
0x41
0x42
0x43
0x44
0x50
0x51
0x52
0x53
0x54
0x55
693

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade 8/12cBrocade 8/24cFabric os v7.0.1

Table of Contents