29
FABR-1010
Recommended
The fabric daemon will discard the EFP. The system will recover through the EFP retrial process.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1010
Message
<timestamp>, [FABR-1010], <sequence-number>,, WARNING, <system-name>, <error
description>.
Probable Cause
Indicates that the errors occurred while cleaning up the request domain ID (RDI). The error
description provides further details. This message is rare and usually indicates a problem with the
Fabric OS.
Recommended
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1011
Message
<timestamp>, [FABR-1011], <sequence-number>, FFDC, ERROR, <system-name>, <error
description>.
Probable Cause
Indicates that the Fabric OS is unable to inform the Fabric OS State Synchronization Management
module (FSSME) that the fabric is stable or unstable. This message is rare and usually indicates a
problem with the Fabric OS.
Recommended
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action
supportSave command and contact your switch service provider.
Severity
ERROR
FABR-1012
Message
<timestamp>, [FABR-1012], <sequence-number>,, WARNING, <system-name>, <function
stream>: no such type, <invalid type>.
Probable Cause
Indicates that the fabric is not in the appropriate state for the specified process. This message is
rare and usually indicates a problem with the Fabric OS.
Recommended
The fabric daemon will take proper action to recover from the error.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
212
Fabric OS Message Reference
53-1002448-01