Ficn-1090; Ficn-1091; Ficn-1092 - Brocade Communications Systems SN3000B Reference

FICN-1090

Message
<timestamp>, [FICN-1090], <sequence-number>,, ERROR, <system-name>,
DevTeraEgr:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> State=0x<the current state of
the device that received the selective reset> statArray=0x<the last 4 status
values received from the device> cmdArray=0x<the last 4 commands that were issued
to the device> tflags=0x<the current emulation tera control flags for the device>
sflags=0x<the current emulation status control flags for the device>.
Probable Cause Indicates the FICON channel issued a Selective Reset for a device that was active in emulation.
Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer
Action support for assistance.
Severity ERROR

FICN-1091

Message
<timestamp>, [FICN-1091], <sequence-number>,, ERROR, <system-name>,
DevTeraEgr:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Probable Cause Indicates the FICON channel issued a Selective Reset sequence for a device.
Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer
Action support for assistance.
Severity ERROR

FICN-1092

Message
<timestamp>, [FICN-1092], <sequence-number>,, ERROR, <system-name>,
DevTeraEgr:FICON Purge received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Probable Cause Indicates the FICON channel issued a Purge Path command sequence for a device.
Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's
Action customer support for assistance.
Severity ERROR
Fabric OS Message Reference
53-1002448-01
38
FICN-1090
307