Spc-3010; Spc-3011; Spc-3012; Spc-3013 - Brocade Communications Systems SN3000B Reference

97

SPC-3010

SPC-3010
Message
<timestamp>, [SPC-3010], <sequence-number>,, WARNING, <system-name>, S<slot
number containing Encryption Engine>, <module name>: SEK integrity failure during
initialization.
Probable Cause Indicates the Crypto Module internal Secret Encryption Key has been corrupted or has not been
initialized.
Recommended Execute the cryptocfg
Action
Severity WARNING

SPC-3011

Message
<timestamp>, [SPC-3011], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>: Persistent data storage error: <SP
status code>, KEK: <KEK octet 1> <KEK octet 2> <KEK octet 3> <KEK octet 4>.
Probable Cause Indicates an attempt to store Crypto Module internal data using the Secret Encryption Key failed -
most likely, the EE has been zeroized or tampered with.
Recommended Execute the cryptocfg
Action needed primary and secondary KEKs.
Severity ERROR

SPC-3012

Message
<timestamp>, [SPC-3012], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>: Persistent data retrieval error: <SP
status code>.
Probable Cause Indicates an attempt to read Crypto Module internal data using the Secret Encryption Key failed -
most likely, the EE has been zeroized or tampered with.
Recommended Execute the cryptocfg
Action needed primary and secondary KEKs.
Severity ERROR

SPC-3013

Message
<timestamp>, [SPC-3013], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>: SEK generation failure: <SP status
code>.
Probable Cause Indicates the Crypto Module internal Secret Encryption Key could not be generated.
658
initEE and cryptocfg regEE commands.
-- --
initEE and cryptocfg regEE commands, then recover or restore the
-- --
initEE and cryptocfg regEE commands, then recover or restore the
-- --
Fabric OS Message Reference
53-1002448-01