Sec-1065; Sec-1069; Sec-1071; Sec-1072 - Brocade Communications Systems SN3000B Reference

SEC-1065

Message
<timestamp>, [SEC-1065], <sequence-number>,, ERROR, <system-name>, Invalid
character in list.
Probable Cause Indicates the input list has an invalid character.
Recommended Enter valid input.
Action
Severity ERROR

SEC-1069

Message
<timestamp>, [SEC-1069], <sequence-number>,, ERROR, <system-name>, Security
Database is corrupted.
Probable Cause Indicates the security database is corrupted for unknown reasons.
Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
Action and contact your switch service provider.
Severity ERROR

SEC-1071

Message
<timestamp>, [SEC-1071], <sequence-number>,, ERROR, <system-name>, No new
security policy data to apply.
Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time.
Recommended Verify that the security event was planned. First change some policy definitions, then run the
Action secPolicyActivate command to activate the policies.
Severity ERROR

SEC-1072

Message
<timestamp>, [SEC-1072], <sequence-number>,, ERROR, <system-name>, <Policy type>
Policy List is Empty!
Probable Cause Indicates the specific policy type is empty. The security database is corrupted for unknown reasons.
Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
Action and contact your switch service provider.
Severity ERROR
Fabric OS Message Reference
53-1002448-01
94
SEC-1065
593