Fw-1047; Fw-1048; Fw-1049; Fw-1050 - Brocade Communications Systems SN3000B Reference

45

FW-1047

FW-1047
Message
<timestamp>, [FW-1047], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high
boundary.
Recommended The supplied current of the SFP transceiver is outside of the normal range, indicating possible
Action hardware failure. If the current rises above the high boundary, you must replace the SFP.
Severity WARNING

FW-1048

Message
<timestamp>, [FW-1048], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value
outside of the acceptable range to a value within the acceptable range.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1049

Message
<timestamp>, [FW-1049], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed.
Recommended Frequent voltage fluctuations indicate that the SFP is deteriorating. Replace the SFP.
Action
Severity INFO

FW-1050

Message
<timestamp>, [FW-1050], <sequence-number>,, WARNING, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has fallen below the low
boundary.
348 Fabric OS Message Reference
53-1002448-01